What is the difference between end-load and side-load pan racks?

An end-load rack takes pans short edge first, so the rack is narrow and suits tight aisles and doorways. A side-load rack takes pans long edge first, making the rack wider but shallower, which some bakers find easier to load from a bench. Pick the one that fits how staff approach it and where it parks.

Are aluminum or stainless pan racks better?

Aluminum racks are lighter, do not rust and suit most bakery and kitchen work. Stainless racks are heavier and stiffer, and some operators choose them for washdown areas or heavy loads. For a roll-in rack oven, follow the oven manufacturer's rack specification rather than choosing by material alone.

How many pans does a full-height rack hold?

It depends on the rack's height and slide spacing. A common full-height configuration holds about 20 full sheet pans at roughly 3-inch spacing, and half-height racks hold about half as many. Racks with closer spacing hold more, so check the number of slides before ordering.

How much do commercial pan racks cost?

List prices on Norpex range from $34.01 to $6,364.99 CAD, with a median of $1,157.49 across 196 priced models; prices are list prices before tax and shipping.

Which brands of commercial pan racks do you carry?

Norpex lists 196 commercial pan racks. The brands with the most models listed are Winholt with 124, Cres Cor with 43 and Omcan with 27.

Do you ship commercial pan racks across Canada?

Norpex ships to delivery addresses across Canada. Equipment ships from distributor warehouses, so dispatch timing depends on the supplier and the destination. For items that can be bought online, shipping is calculated at checkout from live carrier rates for the delivery address and confirmed before payment. There is no automatic free-shipping or flat-rate offer.

Commercial Pan Racks in Canada

Pan racks, also called bun pan or sheet pan racks, hold sheet pans on rows of slides in a mobile frame, so trays move from the bench to the proofer, oven, cooler or holding area without handling each pan. Bakeries, pastry kitchens, caterers, cafeterias and banquet operations rely on them. Full-height, half-height and countertop sizes are common, in aluminum or stainless steel, with end-loading or side-loading slides.

About commercial pan racks

Before you buy

Confirm the rack takes your pan size, usually full or half sheet pans, and whether its slides also hold steam table pans if you need both.
Compare slide spacing with what you rack, since closer spacing fits more pans but leaves less clearance for tall cakes, breads or plated desserts.
Measure the doorways, aisles and any proofer or walk-in the rack has to enter, with the casters included in the overall height.
Choose welded construction for heavy daily use, and knock-down racks when shipping and storage space matter more.
Check the caster quality and brakes, and add a fitted rack cover if pans need protection in transit or in a cooler.

Common questions

What is the difference between end-load and side-load pan racks?: An end-load rack takes pans short edge first, so the rack is narrow and suits tight aisles and doorways. A side-load rack takes pans long edge first, making the rack wider but shallower, which some bakers find easier to load from a bench. Pick the one that fits how staff approach it and where it parks.
Are aluminum or stainless pan racks better?: Aluminum racks are lighter, do not rust and suit most bakery and kitchen work. Stainless racks are heavier and stiffer, and some operators choose them for washdown areas or heavy loads. For a roll-in rack oven, follow the oven manufacturer's rack specification rather than choosing by material alone.
How many pans does a full-height rack hold?: It depends on the rack's height and slide spacing. A common full-height configuration holds about 20 full sheet pans at roughly 3-inch spacing, and half-height racks hold about half as many. Racks with closer spacing hold more, so check the number of slides before ordering.
How much do commercial pan racks cost?: List prices on Norpex range from $34.01 to $6,364.99 CAD, with a median of $1,157.49 across 196 priced models; prices are list prices before tax and shipping.
Which brands of commercial pan racks do you carry?: Norpex lists 196 commercial pan racks. The brands with the most models listed are Winholt with 124, Cres Cor with 43 and Omcan with 27.
Do you ship commercial pan racks across Canada?: Norpex ships to delivery addresses across Canada. Equipment ships from distributor warehouses, so dispatch timing depends on the supplier and the destination. For items that can be bought online, shipping is calculated at checkout from live carrier rates for the delivery address and confirmed before payment. There is no automatic free-shipping or flat-rate offer.

Guides

Buying guide

Stainless Steel Work Tables and Shelving: Grades, Gauges, Racks

7 min read · Updated September 25, 2026

Buying guide

Dough Equipment Guide: Sheeters, Dividers, Presses and Proofers

8 min read · Updated September 25, 2026

Winholt – Holds 20 – 18″ x 26″ Trays Heavy Duty Aluminum Universal Pan Rack – ALUN-1820-HD

Winholt – 21″ Heavy Duty Knock-Down Pan Rack With 2 Locking Casters – AL-1820BKD-HD-2LC

Winholt – Holds 12-18″ Trays Heavy Duty, Sold Top Plate Casters Pan Rack – AL-1812BP-HD-ST

Winholt – 20-18″ Trays Heavy Duty End Loading Aluminum Pan Rack – AL-1820-HD

Winholt – 20-18″ Trays Medium Duty End Loading Aluminum Pan Rack with Tray Guard – AL-1820B-TG

32-tier Enclosed Aluminum Pan Racks

Winholt – 20-18″ Pan End Loading Heavy Duty Pan Rack with Plate Caster, 2 with Locks, Bumpers, HD Reinforced Sides – AL-1820BP-XB-LC

Cres Cor – 12 Pan End Load Aluminum Sheet Pan Rack – EO 207-1812 (Pre-Order Now, ETA 4-6 Weeks)

Winholt – Holds 10-18″ Trays, End Loading Stainless Steel Top Half Height Pan Racks – AL-1810H-SSTOP

Winholt – Holds 20-24″ Donut Screen Rack With Reinforced Sides – AL-2424B-XB

Winholt – 20-18″ Pan End Load Heavy Duty Pan Rack with Tray Guard – AL-1820B-XB-TG

Winholt – Holds 15-18″ Medium Duty Trays End Loading With Locking Casters Aluminum Pan Rack – AL-1815B-LC

Cres Cor – 20 Pan End Load Super-Duty Enclosed Non-Insulated Sheet Pan Rack – EO 101-1820-DSD (Pre-Order Now, ETA 4-6 Weeks)

Winholt – 20-18″ Pan End Loading Heavy Duty Pan Rack with Plate Casters, HD Reinforced Brace, Prison Package – AL-1820BP-XB-PP

Winholt – Holds 20-24″ Donut Screen Rack – AL-2424B

Winholt – 10-26″ Trays Stainless Steel Side Loading Holds Medium Duty Pan Rack – SS-2610B

Winholt – 20-18″ Trays Stainless Steel Heavy Duty, End Loading Nesting Pan Racks – SS-1820N

Winholt – Holds 30-18″ Trays Medium Duty End Loading Aluminum Pan Rack With Tray Guard – AL-1830B-TG

Cres Cor – 18 Pan End Load Half Height Aluminum Sheet Pan Rack – EO 278-PT-1818-DS (Pre-Order Now, ETA 4-6 Weeks)

Winholt – 30 Pans Aluminum Full Height End Loading Extra Heavy Duty Mobile Pan Rack – AL-1830/HD

Winholt – 16-18″ Sheet Pans Knock Down Refrigerator Insert Pan Rack – AL-1816-IR-KD

Cres Cor – 15 Pan End Load Half Height Aluminum Sheet Pan Rack – EO 282-1815 (Pre-Order Now, ETA 4-6 Weeks)

Aluminum, Round Top Bun Rack with 12 Slides and 5″ spacing

Winholt – Holds 20-18″ Trays, Corner Bumpers Medium Duty and End loading Pan Racks – AL-1820B-CB