B12 – Berkel – 12″ Manual Gravity Feed Meat Slicer – 1/2 hp

Berkel Model 827A-PLUS manual gravity feed slicer delivers.Berkel’s hollow ground chromium-plated, carbon steel knife and built-in sharpener. The permanent, tapered guard covers the non-slicing portion of the knife, even when the center plate is removed. The 45° table makes product feed easier, creating more consistent and uniform slices with less waste. The 1⁄2 HP motor, 12″ knife and large product table are well-suited for handling oversize meats, cheeses and a variety of other products. The827A-PLUS is straightforward to operate and disassembles quickly withouttools. The compact space-saving design is well-suited for limited kitchen counter space. 1-speed, 1⁄2 HP, totally enclosed and permanently lubricated knife motor. Furnished in 115/60/1, 4.0 amp, AC, ETL listed. Finish is stainless steel and sanitary anodized aluminum; unit disassembles quickly without tools for easy cleaning. 45° product table with removable meat pusher. Nominal 12″ (300 mm) diameter; hollow ground, hardened and polished forged chromium-plated carbon steel knife. Carriage handles food up to 103⁄4″ (273 mm) wide, by 75⁄8″ (194 mm) high or 73⁄8″ (187 mm) diameter. Precise slice adjustment to a thickness of 9⁄16″ (14 mm). Top-mounted, two stone knife sharpener produces a consistently sharp knife edge. Permanent, tapered knife ring guard covers non-slicing portion of knife even when the center plate is removed; ring guard design delivers more room behind the knife for easy cleaning. Positive, moisture protected, on/off switch with power light indicator. Attached 6-foot, flexible, 3-wire cord and plug for grounded receptacle (5-15P). Motor: 1-speed, 1⁄3 HP, totally enclosed, permanently lubricated ball bearings, thermally protected. Electrical: Furnished in 115/60/1, 3.1 amps, AC, ETL listed. Finish/Construction: All food contact areas are stainless steel or anodized aluminum including the pusher, gauge plate, product table, center plate, knife ring guard and one-piece base. Slicer disassembles quickly without tools for easy cleaning. Knife: Nominal 12″ (300 mm) diameter, hollow ground, hardened and polished forged chromium-plated carbon steel, rotates at 310 rpm. Cutting Capacity: Carriage handles food up to 83⁄4″ (222 mm) wide by 71⁄4″ (184 mm) high or 7″ (178 mm) diameter. Slice Thickness: Precision system provices infinite slice adjustment and consistent cuts of hard or soft foods from tissue thin to 9⁄16″ (14 mm). Full Gravity Feed: Full 45° angle feed requires less mechanical pressure. fitted with removable anodized aluminum pusher to hold product and minimize waste. Knife Sharpener: Top mounted, two stone system for a lasting, razor-sharp edge. Knife Ring Guard: Permanent, tapered guard covers non- slicing portion of knife edge even when the center plate is removed. The ring guard is engineered to provide added room behind the knife for easy cleaning. On/Off Switch: Highly reliable, moisture resistant, on/off switch with power light indicator. Cord and Plug: Attached 6-foot, flexible, 3-wire cord and plug for grounded receptacle (5-15P). Warranty: All parts, service and travel coverage for one year, excluding wear items